Installation & Assembly

Carefully sit onto the Sunlounger.

This pressure will help the Sunlounger reach full alignment at all joints.

In a sequential manner, gradually tighten all Bolts and Screws until evenly

secured.

Inspect the Sunlounger and make sure all parts are adequately

connected.

Your Sunlounger is ready for use.

This Sunlounger can only be used on a flat, level surface.

Note:

6.1) Align the Backrest of Sunlounger in position you want

6.2) By hand, push the tray out when using or pull the tray in if not

using

Step 6

6.1

6.2