Installation & Assembly (Table)

ManualsBrandsUnion Rustic Manuals2 Person Patio Conversation SetsSolid Wood 2 - Person Seating Group with Cushions

Table Of Contents

Assembly Instructions

Page 1 OF 6

Caution: This Table is NOT a TOY. Keep your child / children at bay during

the assembly process. For moving the Table and to prevent damage to the

Table, two adults are needed to execute this action.

TABLE

Caution: You must read this before you proceed

Please look underneath Seat panel of the Loveseat

for hardware packs.

Summary of content (6 pages)

PAGE 1
Assembly Instructions Caution: You must read this before you proceed Please look underneath Seat panel of the Loveseat for hardware packs. TABLE Caution: This Table is NOT a TOY. Keep your child / children at bay during the assembly process. For moving the Table and to prevent damage to the Table, two adults are needed to execute this action.
PAGE 2
Parts List Label Description Picture QTY A Table Top 1 B Leg Panel 2 C Support Bar 1 Description QTY Hardware Label Picture 1 Screw ( M7x70mm) 7 2 Allen Key 1 Assembly Preparation Before Beginning Assembly: Page 2 OF 6
PAGE 3
Before Beginning Assembly: OVERVIEW Table Top (A) Leg Panel (B) Support Bar (C) FRONT FACING This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Unpack and place all parts on a clean, non-marring surface.
PAGE 4
Step 2 B 2.1 A 1 2 2.2 2 1 B A Lay down the Table Top (A) with its underside facing skywards onto a clean, soft surface to avoid any scratch or damage to the product. 2.1) Put the tenon of Table Top (A) into the mortise of Leg Panel (B) and then using Screw (①) with Allen Key (②) to secure these parts as shown in above picture. 2.2) Repeat the same process with the remained Leg Panel (B). Do not fully tighten the Screws.
PAGE 5
Step 3 B 1 C 2 B Put the tenon of Support Bar (C) onto the mortise of Leg Panels (B) and then using Screw (①) with Allen Key (②) to secure these parts as shown in above picture. You may need to push the Leg Panels (B), outwards, slightly to attach the Support Bar (C). Do not fully tighten the Screws. Step 4 Stand the Table up, with assistance from your adult partner. Exert pressure ﬂoorwards, onto the Table with both your hands.
PAGE 6
Care & Maintenance Page 6 OF 6