PILASTER FLOOR FOUNTAIN Care and Instruction Manual
ASSEMBLY INSTRUCTIONS Thank you for purchasing our water feature, you are now only minutes away from filling your home or outdoor living space with peaceful displays. Our guarantee backs all of our water features, please do not hesitate to contact our Customer Support Team for resolutions to any parts or installation concerns.
ASSEMBLY INSTRUCTIONS Please reference the separate parts list and ensure that all pieces are included in the package prior to assembly. SUGGE More than one person may be required to complete the assembly of this product. To protect the finish, place all parts on a soft surface when unpacking. When assembling ensure that all parts are firmly tightened. Choose a location: This freestanding water feature can be placed in the center of your space or against a wall.
ASSEMBLY INSTRUCTIONS Place upper base (B) onto lower base (A). Place reservoir (C) onto upper base (B). C B B A Feed pump cord through the plastic tube. Place pump (G) into reservoir (C).
ASSEMBLY INSTRUCTIONS Place tray (D) onto reservoir (C). D C Place lower column (E) onto tray (D).
ASSEMBLY INSTRUCTIONS Take out pump (G) from reservoir (C). Attach pump (G) to the rubber hose. Put pump (G) back into reservoir (C), and place upper column (F) onto lower column (E). Rubber hose G G C C F FINAL STEPS Place decorative river stones (H) onto tray (D). 7 Fill reservoir (C) with 1 gallon of distilled water. Plug pump (G) into outlet. Use shims (I) to level the fountain as necessary.
ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING To clean the pump Unplug the pump from the electrical outlet. Use a small soft brush or place it under a water stream to remove debris. To keep water clean Periodically change water to prevent algae buildup.
ASSEMBLY INSTRUCTIONS PUMP SAFETY & TROUBLESHOOTING cont. If abnormal noise is heard during operation (with water): • Disconnect the power supply and then remove the pump front cover and impeller cover. • Use hand to grip the impeller, gently pull the impeller/rotor assembly out of the pump housing. • Rinse the impeller/rotor assembly and the cavity with clean water. If breakage or surface damage is found in the assembly contact Customer Service for a part replacement.
ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS What should I consider when selecting a water feature? In addition to your personal style tastes, be sure you have an area for your water feature that can be safely exposed to water, as splashing can occur. Also take into consideration what a water feature can add to your environment: the sound of flowing water or decorative lights.
ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED The water is not flowing evenly over my water feature’s surface. How do I correct this? Oil and dirt from your hands or the environment my interrupt proper water flow. Use the water guiding pad (if included with your model) or a mildly abrasive scrub pad and mild soap to clean the surface of the water feature.
ASSEMBLY INSTRUCTIONS FREQUENTLY ASKED QUESTIONS CONTINUED My pump is making a loud noise. How do I fix that? 1. Be sure the pump is fully submerged in water. If it is not, and pulling in air, it will make unwanted noise. 2. Check to make sure the pump is not touching the water feature anywhere other than the bottom. If it is up against the side wall or another part, the vibration from the pump can cause unwanted noise.
