Assembly Instructions Caution: You must read this before you proceed Rocking Chair 1
Part List Label Picture Description QTY A Backrest Panel 1 B Right Leg Panel 1 C Left Leg Panel 1 D Seat Panel 1 E Seat Cushion 1 Hardware No.
Assembly Preparation Before Beginning Assembly: Assembly Steps Overview Backrest Panel (A) Right Leg Panel (B) Left Leg Panel (C) Seat Cushion (E) Seat Panel (D) FRONT FACING This Rocking Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Rocking Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Unpack and place all parts on a clean, non-marring surface. Step 2 C D Align Seat Panel(D) with Left Leg Panel(C) as shown above. Attach Seat Panel(D) to Left Leg Panel(C) using Screw(①), and Bolt(③) with Allen Key(④). Do not fully tighten the Screw and Bolt.
Step 3 D B Align Seat Panel(D) with Right Leg Panel(B) as shown above. Attach Seat Panel(D) to Right Leg Panel(B) using Screw(①), and Bolt(③) with Allen Key(④). Do not fully tighten the Screw and Bolt. Step 4 C B C A A B ④ Attach Backrest Panel(A) to Right Leg Panel(B), Left Leg Panel(C), and Backrest Panel(A) using Bolts(②) with Allen Key(④). Do not fully tighten the Bolts.
Step 5 E Exert pressure floorwards, onto the Rocking Chair with both your hands. This pressure will help the Rocking Chair reach full alignment at all joints. In a sequential manner, gradually tighten all Screws and Bolts until evenly secured. Inspect the Rocking Chair and make sure all parts are adequately connected. Place Seat Cushion(E) onto the Rocking Chair. Lay the Rocking Chair down and tie the velcro straps of the Cushion(E) under the Seat Panel(D) as shown above.
Care & Maintenance 7
