Specifications

2. Printer preparations

3. Pass the end of the roll paper under the guide bar at the lower part of the

flip panel, and insert it between the guide bar and guide.

Press the [FEED] key with the paper inserted, and release the key

when the paper comes out of the paper ejection slot.

4. Remove the flexure of the roll paper, and push in the push panel firmly until

you hear it click.

It may cause some trouble if you pull the paper fast or backward when the paper jam occurred during the

paper setting.

Please pull the paper in the direction of the arrow A slowly and straight to remove it after stopping the

paper feed.

Cut the power then on again when it doesn't return normally after removing the paper.

Enlarged section

← Front

Guide bar

Roll paper

Guide

Note