Specifications

4. For greater use of the printer
23
5. The changed set value is printed.
Cautions in setting
Some setting items are dependent on one another such that one setting does not become valid or cannot
be made until another setting is turned ON.
The setting items having a mutual dependence are shown below.
Dependence between settings
Source setting Target setting Description
06: Print Every ON/OFF 07: Print Every Format The Print Every Format setting is not
valid until the Print Every ON/OFF
setting is turned [ON].
07: Print Every Format 20: Batch Total ON/OFF If the Print Every Format setting is
made at [
8], [9] or [10], the Batch Total
ON/OFF setting cannot be turned
[ON].
20: Batch Total ON/OFF 07: Print Every Format The Print Every Format setting [8], [9]
or
[10] cannot be selected until the
Batch Total ON/OFF setting is turned
[OFF].
22: Code Selection 24: Code Table Selection
Ach
25: Code Table Selection
Bch
The Code Table (A/Bch) setting cannot
be made until the Code Selection
setting is made at [2] or [3]
.
End --> ESC
Next --> Number-ENT
Change --> ENT
NOW ==> Off
09:Interval Print On/Off
--------------------------
New ==> Off
After changing the setting, go to the next setting
(step 2 and 3).
To end the setting mode:
To make the Interval Print ON/OFF setting:
To make other settings:
This part is for the next
setting (09 : Interval Print
ON/OFF).
Changed set value
[ESC]
[Setting No.] → [ENT]
[ENT]