Specifications

4. For greater use of the printer

Set the number of code digits for classification.

Details of setting

Usually up to six digits can be used for code names, but if the Number of Code Digits is set,

code names are classified by the set number of digits from their ends, so that code names having

a different beginning can also be classified as the same for totaling.

the code table.

Name of setting 23: Number of Code Digits Designation

Setting range 0 - 6 (digits)

Initial value 6

Caution When using code tables, set the Number of Code Digits to two digits. If

it is set to three or more digits, normal classification cannot be

performed.

Name of setting 24: Code Table Registration Ach

25: Code Table Registration Bch

Maximum number

of codes

64 (32 for each ch)

Caution

・The code table can only be registered with the keys on the front panel.

・For details of the code table, see "Classification by code name and

code table"(page 56).

23: Number of Code Digits Designation

Example)

This part is printed but is not

the target of classification for

totaling.

Classification is performed only

with the last two digits, which are

the target of totaling.

Classification for

The Number of Code Digits is set at two digits.

totaling

①

②

①

②

０００００１

０００１０１

０００２０１

１００１０２

０００１０２

24, 25: Code Table Registration Ach/Bch