Specifications

5. Optional interface

RS-232C settings

Select transmission rate

Select parity bit.

Select data/stop bit.

When printing a katakana code, set the RS-232C character length of the M252A and the PC to 8 bits. If

set to 7 bits, transmission of katakana data is disabled.

Name of setting 46: RS-232C Transmission Rate

Selection item 0. 1200bps

1. 2400bps

2. 4800bps

3. 9600bps (initial value)

Caution The setting must be the same as the connecting equipment.

Name of setting 47: RS-232C Parity Bit

Selection item 0. Even

1. Odd (initial value)

2. Non

Caution The setting must be the same as the connecting equipment.

Name of setting 48: RS-232C Data/Stop Bit

Selection item 0. 7bit 1stop (initial value)

1. 7bit 2stop

2. 8bit 1stop

3. 8bit 2stop

Caution The setting must be the same as the connecting equipment.

46: RS-232C Transmission Rate

47: RS-232C Parity Bit

48: RS-232C Data/Stop Bit

Note