Specifications

7. Troubleshooting
76
The printer is clogged with dust or jammed with paper.
Open the push panel, and check the mechanical part of the printer. Remove dust with air
or the like.
In the case of a paper jam, the printer is locked, so that [Print] and [Feed] cannot be used.
It may cause some trouble if you pull the paper fast or backward when you remove the
paper. Please pull the paper forward slowly and straight to remove it after stopping the
paper feed.
After removing paper, turn the power off and on again.
The [PRINT] Key setting is OFF.
Referring to "Print Key ON/OFF"(page 38), make the [PRINT] Key setting ON.
A ribbon cassette has not been installed, or the ribbon cassette is out of ink.
Referring to "Installing a ribbon cassette"(page 8), install or replace the ribbon cassette.
SI/F signals from the load cell indicator include indicated and various kinds of weight
data irrespective of the value indicated by the indicator at that time.
Select data to be printed on the printer side. Set referring to "Print Data Selection Ach/
Bch" (page 25).
Cause 3
Remedy1
Remedy2
Printing is not generated even if the [PRINT] key is pressed.Trouble 3
Cause 1
Remedy1
Although the printer head is running, nothing is printed.Trouble 4
Cause 1
Remedy1
Values different from those indicated by the load cell
Trouble 6
Trouble 5
indicator are printed.
Cause 1
Remedy1