Specifications

Appendix
88
Product specifications of the M252A
Printer section
Printing system
5 × 7 dot impact system
Print speed Approx. 2.5 lines/sec. (approx. 60cps)
Number of print digits 24 digits
Ink ribbon Ribbon cassette
Printing paper Roll paper (PP350)
width: 57.5 ±0.5mm, diameter: 60mm, overall length: 30m)
Number of printable lines: Approx. 8,000 lines/roll
Duplicate roll paper (PP350-2P)
width: 57.5 ±0.5mm, diameter: 60mm, overall length: 20m)
Number of printable lines: Approx. 5,900lines/roll
Durability MCBF 1,000,000 lines or more
(Roll paper: Approx. 200 rolls or more)
Setting section
Setting method Front panel keys
Storage of set values Set values: Stored in NOV-RAM (nonvolatile memory).
Data: SRAM (backed up by a lithium battery).
Settings See "Setting mode list"(page 82).
Main functions
Printing methods Print with the PRINT key.
Print by print command input (PRINT terminal).
Print by automatic print command input (SI/F, RS-232C).
Automatic print by interval setting.
Print data Date, time, measured value, code (6-digit), count (1-9999
times), subtotal (9-digit), grand total (9-digit), batch total,
target value, range, maximum value, minimum value, average,
standard deviation, range (maximum - minimum), diagram,
histogram
Functions GT/ST print, batch total, code classification, delete print, over
print, initialization, maintenance, double print
External input signal
Rear terminal block (1) COM, (2) FEED, (3) PRINT, (4) ST, (5) GT
Connector: WAGO 5pin