User Manual

U n i q A i r | 7
3.3 Attaching the stand or wall mount
NOTE! Two holes have been made in the base of the device for the stand or
wall mount.
a) Stand
1. Place the device on a flat surface with the glass panel facing
down.
NOTE! The glass is easily scratched. Use a cloth or similar
means to provide a soft surface, if necessary.
2. Use two screws to attach the stand that came with the
product package to the base of the device. See the picture
below.
b) Wall mount (optional)
1. Use four screws to attach the wall mount
to the desired place on a wall.
2. Use two screws to attach the base of the
Uniq device to the wall mount. See the
adjacent image.