Installation Instructions

Thank you for choosing our Speaker stereo bluetooth speaker. Please carefully review

the following instructions before operating the Unit.

Paring

1.Recharge the speaker first or connect the speaker to a USB charging port if

necessary.

2. Turn on the speaker.

3. Activate the bluetooth connectivity on your device.

4. Select “BT-Speaker" from the device list when your device completes bluetooth

scanning.

5. Enter the code issued by your device (may not applicable for some devices).

6. Paring complete.

Basic Operation

1. Press the play button to start, pause, and resume playing.

2. Short press the fast forward button to skip to the next title.

3. Short press the backward button to return to the previous title.

4. Press the talk button to answer or disconnect a call

5. Press and hold the fast forward button" + "to increase the volume

6. Press and hold the fast backward button“ - ”to decrease the volume

Optionally, you can use the included 3.5mm AUX cable to establish a wired

connection with a music player or PC.

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined by turning

the equipment off and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

PAGE 1
Thank you for choosing our Speaker stereo bluetooth speaker. Please carefully review the following instructions before operating the Unit. Paring 1.Recharge the speaker first or connect the speaker to a USB charging port if necessary. 2. Turn on the speaker. 3. Activate the bluetooth connectivity on your device. 4. Select “BT-Speaker" from the device list when your device completes bluetooth scanning. 5. Enter the code issued by your device (may not applicable for some devices). 6. Paring complete.
PAGE 2
-Consult the dealer or an experienced radio/TV technician for help. This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.