User's Manual

Chapter 3 Installation
SX03-20000-01-M01 3-10
3.6.2 Installation Surface
The load b
earing strength of the roof or floor where the repeater cabinets will be placed
should be taken into consideration. The repeater cabinets weigh approximately 2200 lbs.
combined and rests on an area of 7.85 square feet of roof or floor space.
Before installing the repeater cabinets, check the installation surface structure, flatness and
suitability.
3.6.3 Repeater Cabinet Positioning
Over tipping the repeater may cause it to fall over, resulting in personal
injury or loss of life.
 The methods described in Section 3.6.1 can be used to move the repeater cabinets
to the required installation location.
 Unbolt the cabinet’s feet from the pallet before attempting to remove it from the
pallet.
 Position the repeater cabinets according to the site drawings (if available).
 The repeater cabinet must be bolted to a load frame, to the roof surface, or to the
floor at all sites to prevent possible tipping. Please see Figure 3-5
for mounting hole
locations.