User's Manual

Chapter 3 Installation
Figure 3-29 LB Cabinet Electronics Compartment Components (with connections)
PICTURE TBD
3.11.1
Ground and AC Connections
Al
l LB cabinet internal ground wires are pre-wired to the cabinet ground bar. During the
installation procedure, several components must be connected to the ground bar via the
pre-wired ground wires. Please see the subsequent sections of this manual.
All LB cabinet internal AC components are pre-wired to the cabinet PDU. Only the cabinet
PDU needs to be connected to building/site electrical service panel (or AC disconnect
device).
SX03-2000
0-01-M01 3-34