User's Manual Part 1

Chapter 3 Installation
SX03-10000-01-M01 3-12
3.7.1 BMS 12 VDC Rectifier Module
he BMS mounting shelf includes two (2) empty slots for the 12 VDC rectifier modules. T
Please refer to Figure 3-3
, Figure 3-4 or drawing SX03-10000-03-D01 for the mounting
position of the rectifiers.
The BMS 12 VDC rectifier modules should be installed in the following sequence:
1. Slide the first rectifier module into the left-most slot until it stops – see Figure 3-7
.
ntil
the second rectifier module into the middle slot until it stops and repeat step 2.
igure 3-5 12 VDC Rectifier Module Front and Rear Panel
2. Secure the rectifier module to the shelf by tightening the Phillips pan head screw u
it stops. As the screw is tightened, the rectifier module will slide all the way into the
slot.
3. Slide
F
igure 3-6 BMS Mounting Shelf with Controller F
igure 3-7 BMS Mounting Shelf with 1 Rectifier Module Installed F
1) 12 VDC Rectifier Module
with rectifier module) 2) Mounting Screw (supplied
3) Empty Slot for Second 12 VDC Rectifier Module