User's Manual

Chapter 3 Installation

3.9.4 Terrestrial Repeater Monitoring System (TRMS)

Duri

ng the installation procedure, a number of wires/cables must be connected to the TRMS

rear panel.

For a Combined DRU, please refer to Table 3-9

or drawing SX03-30900-02-D06. The cables

should be connected in the order that they appear in Table 3-9

For an Independent DRU, please refer to Table 3-10

or drawing SX03-30900-03-D06. The

cables should be connected in the order that they appear in Table 3-10

Figure 3-36 TRMS Rear Panel

Table 3-9 TRMS Rear Panel Connections – Combined DRU

TRMS Port Name Type Cable Number

N/A N/A Ground Post SX03-33937-05

Y2B RF IN SMA (F), 50 ohm SX03-33912-01

Y9B LAN RJ-45 SX03-33901-02

Y10A WAN RJ-45 SX03-33901-01

Y12 N/A

(AC Input)

NEMA Socket Polarized Type IEC

603

SX03-33932-01

Table 3-10 TRMS Rear Panel Connections – Independent DRU