User's Manual

Chapter 3 Installation
The following components are installed in the Independent DRU cabinets prior to shipping.
Table 3-2 Independent DRU Components Installed at the Factory
Control Cabinet Part Number Quantity
PDU SX03-33300-01 1
Dual Band Pass Filter (DBPF) SX03-50100-01 1
Low Noise Amplifier (LNA) SX03-50200-01 1
BMS Mounting Shelf w/Controller SX03-50300-01 1
Break-Out-Board SX03-92020-01 1
HPA Cabinet Part Number Quantity
4-Way Splitter 000087234R 4 (2 per cabinet)
2-Way Splitter 000087315R 2 (1 per cabinet)
4-Way Hybrid Combiner w/Loads SX03-21825-01 4 (2 per cabinet)
PDU SX03-31300-01 2 (1 per cabinet)
Fan/Blower SX03-31600-01 2 (1 per cabinet)
Transmission Sub-system Controller (TSC) SX03-50700-02 2 (1 per cabinet)
HPA PSU Mounting Shelf SX03-51710-01 8 (4 per cabinet)
Magic Tee SX03-52100-01 2 (1 per cabinet)
HPA/TSC Transmit Output Coupler/RF
Detector
SX03-52350-01 6 (3 per cabinet)
Output Filter Network (OFN) Cabinet Part Number Quantity
Independent OFN, WG SX03-24100-03 1
DRU Transmit Output Coupler/RF Detector SX03-51600-01 2
WR340 to N-Type (F) End Launch Adapter SX03-52400-01 1
NOTE: A number of other components, which were installed in the cabinet prior to shipping,
are not listed in Table 3-1
or Table 3-2. They include:
 Surge suppressors
 Connectors, adapters and flanges
 Mounting brackets and panels
 Ground, AC, DC and communications wires
 RF cables
SX03-30000-01-M01
3-2