Use And Care Manual

11
OPERATION
Your Unique fridge, like any battery-powered refrigerating appli-
ance, requires dierent care than appliances plugged into an elec-
tric utility. Prudent operation is the key to extended service.
STARTING THE FRIDGE
After the fridge has been properly connected to the 12 or 24 VDC
power source, the compressor will automatically turn on and the
cabinet will begin cooling. Allow the cabinet to cool for at least 4
hours prior to adding foodstu.
TEMPERATURE CONTROL
The temperature within the fridge and
freezer compartments is controlled by the
thermostat situated on the inside centre
ceiling of the fridge area. When you first
start the fridge we suggest that you turn
the thermostat to a maximum setting (7)
until desired refrigeration temperatures are
achieved. The correct internal temperature
setting can be found by measuring the tem-
perature of the central or middle portion in
the appliance.
The fridge will run a few degrees colder at high elevations.
NORMAL OPERATING TEMPERATURE
THERMOSTAT
SETTING
FRIDGE TEMPERATURE FREEZER
TEMPERATURE
Setting = 4-5 2˚C to 4˚C
35˚F to 39˚F
-10˚C to -15˚C
14˚F to 5˚F
Setting = 7 -3˚C / 26.6˚F -15˚C / 5˚F