Installation Guide

ManualsBrandsUnique Home Designs ManualsDoors & Windows36 in. x 80 in. Plain Bar Copperclad Right-Hand Surface Mount Aluminum Security Door with Charcoal Insect Screen

• Read completely through the installation instructions before proceeding with installation

• Installation requires two people

• Use appropriate protective equipment, including safety glasses

• Children should not be allowed in work area

• Failure to install door correctly could result in injury

RECOMMENDED TOOLS

Safety Glasses Measuring Tape

Pencil

Level

Drill Bits

1/8", 5/32", 3/16"

Phillips-head (#2 & #3) &

Flat-blade screwdriver

123456

234

123456

234

Square

Box Cutter

Hammer

Wood Blocks (2"x4"x6")

Shims

Paintable Caulk &

Caulk Gun

Tin Snips

Drill

Page 1

MK615 04082020

Premium Security Screen Door

Installation Instructions

Surface Mount

Above average degree of difculty. Requires

installation experience.

PROFESSIONAL INSTALLATION RECOMMENDED

Even professional installers will benet from watching.

REVIEW INSTALLATION VIDEO

Customer service and technical support are available.

Monday - Friday

1-866-317-8867

support@uhdco.com

NEED HELP?

RETAIN PACKAGING DURING INSTALLATION

Do NOT discard packaging materials until

installation is complete

INSTALLATION

EASY HARD

INSTALLATION

EASY HARD

INSTALLATION

EASY HARD

INSTALLATION

EASY HARD

INSTALLATION

EASY HARD

INSTALLATION

EASY HARD

Advanced Screen Systems

Advanced

Screen Systems

Advanced

Screen Systems

Advanced

Screen Systems

Advanced

Screen Systems

Summary of content (16 pages)

PAGE 1
Ad va n ce d S c re e n Sys te m s Surface Mount Premium Security Screen Door Installation Instructions • • • • • Ad va n ce d S c re e n Sys te m s Read completely through the installation instructions before proceeding with installation Installation requires two people Use appropriate protective equipment, including safety glasses Children should not be allowed in work area Failure to install door correctly could result in injury Ad va n ce d S c re e n Sys te m s RETAIN PACKAGING DURING INSTALLATION
PAGE 2
DOOR PARTS A) Hinge-side jamb B) Door slab C) Lock-side jamb D) Top header jamb E) Bottom bar HARDWARE & FASTENERS F) Threshold plate G) Mulit-blade bug sweep H) Touch-up paint I) One-way driver tool J) 4" one-way screws (12) K) #10 x 3-1/2" drywall screws (2) L) #8 black screws (8) M) 6" x 36" cardboard template N) Top header jamb caps (2) D 3-1/2” flathead 2-1/2” flathead 2” drywall I 1” flathead J 1/2” flathead K B A C M H G F E N 1/2” panhead L self drilling 5/8”
PAGE 3
1 Determining your Your build Build out Outarea Area (continued) Inspect Your Entryway for Obstructions Check for any obstructions above and around your entryway that may prevent the outward swing of your new security door, and/or its installation, such as: • Light fixtures • Low overhang • Door bell • Trees, bushes, or hanging plants Determine Type and Readiness of Mounting Surface Your security door will require a minimum mounting surface of 1" on the trim above, and on both sides of your entry door.
PAGE 4
2 Determining your Your threshold Build Out configuration Area (continued) Look at your existing entry door threshold and use the diagrams below to determine which threshold configuration best applies to your entryway. This will determine whether a bottom bar is or is not required for your security door. Bottom Bar Required 3 Bottom Bar NOT Required The concrete is set back and lacks space to mount to the threshold plate. The concrete extends at least 7/8" further than your trim.
PAGE 5
4 Determining Install the hinge-side Your Build jamb Out Area (continued) For Left Swing Door 3 Primary Entry Door 1 Hinge side jamb installs opposite entry door handle A B For Right Swing Door Position hinge-side jamb (A) on the desired side of the opening for your door swing. Allow for a 1/8" gap between the hinge-side edge of jamb and inside-edge of your mounting surface.
PAGE 6
5 Determining Install the lock-side Your Build jamb Out Area (continued) Hinge side Lock side Gap between door (B) and both side jambs (A & C) should appear equal on each side with a minimal reveal of 1/8", up to a maximum reveal of 1/4" 7 B 5 C A 6 8 6 Jamb Alignment Align the lock holes, in the lock-side jamb (C), with the lock bolts extended.
PAGE 7
8 Determining Install the threshold Your Build plate Out Area (continued) 1. The contour of door framing varies, making it necessary to cut the threshold plate (F) to fit. We recommend cutting a cardboard template to fit the opening first, to avoid cutting the threshold plate incorrectly. 2. Lay provided cardboard template (M) on top of the bottom bar and push into existing threshold, as far as it will go.
PAGE 8
11 Install Determining the Door Your Closer Buildand OutWind Area Chain (continued) (optional, purchased separately) Follow the manufacturer’s instructions included with the wind chain and door closer to install on your new security door. Note: It is not required to use a wind chain and door closer for your security door.
PAGE 9
Ad va n ce d S c re e n Sys te m s Monte de superficie Instalación de puertas premium de seguridad • • • • • Ad va n ce d S c re e n Sys te m s Lee todas las instrucciones de instalación del kit antes de la instalación La instalación requiere de dos personas Usa el equipo de protección apropiado, incluyendo gafas de seguridad Mantén los niños alejados del área de trabajo Instalar incorrectamente la puerta puede causar lesiones Ad va n ce d S c re e n Sys te m s CONSERVA EL EMPAQUE DURANTE LA INSTALACI
PAGE 10
PIEZAS DE LA PUERTA A) Jamba del lado de las bisagras B) Hoja de la Puerta C) Jamba del Lado de la cerradura D) Jamba del travesaño superior E) Barra inferior HERRAJES Y SUJETADORES F) Placa del umbral G) Guardapolvo contra insectos, de aletas múltiples H) Pintura para retoques I) Herramienta de destornillador unidireccional J) Tornillos unidireccionales de 4" (12) K) Tornillos para drywall núm. 10 de 3-1/2" (2) L) Tornillos núm.
PAGE 11
1 Determining Definir el áreaYour de construcción Build Out Area (continued) Revisar si hay obstáculos en la entrada Comprueba si arriba o alrededor de la entrada hay obstáculos que puedan impedir la instalación de la nueva puerta de seguridad o su abertura hacia afuera; obstáculos como: • Lámparas • Salientes bajos • Timbres • Árboles, arbustos o plantas colgantes Moldura de ladrillo (vista superior) Puerta de entrada Viga Jamba de la puerta de entrada Superficie de montaje mínima de 2.
PAGE 12
2 DetermininglaYour Determinar configuración Build Out Area de tu(continued) umbral Observa el umbral de tu puerta de entrada actual y usa los diagramas más abajo para determinar cuál es el umbral correcto para tu entrada. Esto determinará si necesitarás o no instalar la barra inferior en la puerta de seguridad. Requiere la barra inferior No hay espacio en la superficie de concreto para montar la placa del umbral. NO Requiere la barra inferior El concreto sobresale al menos 7/8" más allá del contramarco.
PAGE 13
4 Determining Instalar la jamba Yourdel Build lado Out deArea las bisagras (continued) Puerta de abertura a la Izquierda 3 Este lado hacia arriba Nota: Debe quedar un espacio de al menos 2-3/4" por debajo de la jamba del lado de las bisagras y debajo de todo el ancho de la puerta, para la barra inferior (montada en el Paso 7).
PAGE 14
5 Determining Instalar la jamba Yourdel Build lado Out deArea la cerradura (continued) Lado de la bisagra Lado de la cerradura El espacio entre la puerta (B) y ambas jambas (A y C) debe quedar igual por ambos lados con un reborde mínimo de 1/8" y máximo de 1/4" 7 B 5 C A 6 8 6 Alinear la jamba Alinea los orificios de la cerradura, en la jamba del lado de la cerradura (C), con los pestillos de la cerradura extendidos.
PAGE 15
8 Determining Instalar la placa YourdeBuild umbral Out Area (continued) 1. El contorno de los marcos de las puertas varía, por lo tanto es necesario cortar la placa de umbral (F) a la medida. Recomendamos recortar primero una plantilla de cartón a la medida de la abertura para evitar errores irreversibles al cortar la placa de umbral. 2. Coloca la plantilla de cartón (M) arriba de la barra inferior y presiona para encajarla en el umbral actual hasta donde sea posible.
PAGE 16
el cierre de Build la puerta la cadena de retención (opcional, vendidos por separado) 11 Instalar Determining Your OutyArea (continued) Sigue las instrucciones del fabricante incluidas con la cadena de retención y el cierre de la puerta para instalar en tu nueva puerta de seguridad. Nota: No es imprescindible usar un cierre y una cadena de retención en tu puerta de seguridad.