Installation Guide

ManualsBrandsUnique Home Designs ManualsKitchenSunfire Copperclad Right Active Surface Mount Aluminum Security Door with Black Perforated Aluminum Screen

Installing the Bug Sweeps

Open one side of the door. Slip the left multi-blade bug sweep (F) onto the bottom of the door. Hold sweep

in place and close the door. Allow the sweep to fall and sit rested on the left threshold plate (H). Note: Be

sure there is not a gap between the sweep and the threshold plate, and that the sweep is centered on the

bottom of the door. Use 1/8" drill bit to pre-drill the two outer holes for mounting screws. Attach the sweep

to the bottom of the door, by the two outer holes, using the provided #8 black self-tapping screws (O).

Test that the door opens and closes freely. If not, loosen the screws and make necessary adjustments.

Retighten screws and test again. Repeat until successful. Pre-drill remaining holes and install the rest of the

provided #8 black-self tapping screws (O).

Repeat this step for the other side of the door.

Installing the Door Closer and Wind Chain (Optional, purchased separately)

Follow the manufacturer’s instructions included with the windchain and door closer to install

the windchain and door closer on your new security door. Note: It is not required to use a

windchain and door closer for your security door.

Touch-Up Paint

Shake the supplied touch-up paint (K)

vigorously for 2 minutes and paint the heads

of the one-way screws as indicated in the

diagram.

White Grease Lubricant (not included)

Use white grease to lubricate the hinges of

your new security door every six months.

Final Touch Up and Upkeep Suggestions

Caulk

(not included)

Caulk around the outside

of the security door jamb

frame using paintable

caulk and paint to the

desired color.

Paintable caulk & gun

(K)

MK616

Warranty Information

Your Unique Home Designs Premium Security Screen door is warranted for residential installations against manufacturer defects under normal use for as long as you own your UHD product, and

terminates if you sell or otherwise transfer the product or the property upon which it was installed. The Powder Coat Finish is warranted for ve years from date of purchase. All other components

of the product, including sunscreen material, bug sweeps, weather-stripping, and composite materials are covered for one year from date of purchase. If the door breaks or structural defects occur,

Unique Home Designs will, at our discretion, repair or replace the door. If your home is burglarized and entry was accomplished through a UHD security door, locked with a double dead bolt, UHD

will pay your insurance deductible up to $1000 or replace as applicable the damaged UHD security door at no charge (the "Home Protection Warranty"). Replacement items may vary in style due

to changes in suppliers and product. Not all colors can be reproduced if colors have been discontinued. UHD is not responsible for any labor expense required to repair or replace the door. UHD

is not responsible for securing the property while warranted items are being repaired or replaced. Cutting parts not specied by the installation guide or parts drilled incorrectly are not included in

this warranty. Any problem caused by abuse, misuse, failure to maintain warranted item properly, adjustments due to settling of the structure that the product is mounted on, or acts of God, are not

covered.

To make a claim under this Warranty, send a brief written description of the problem, a picture of the claim, proof of purchase,

and your contact information to: Unique Home Designs, 973 N. Colorado Street, Gilbert AZ. 85233 Attn: Warranty Claims