Installation Guide

ManualsBrandsUnique Home Designs ManualsDoors & Windows36 in. x 96 in. Cottage Rose Black Surface Mount Left-Hand Steel Security Door with Expanded Metal Screen

Installation Instructions

For Single Doors

Parts and Recommended Tools

A) Door/Hinge-side

Jamb Assembly (1)

B) Lock-side Jamb (1)

C) Top Header Jamb (1)

D) 4" One-way Screw (8)

YOU WILL NEED:

Your choice of locksets, with

2-3/8" backset (sold separately)

Recommended Tool List:

•Measuring tape

•Pencil

•Level or string plumb line

•Drill and 3/16" drill bit

•One-way driver

•Safety glasses

•Wood blocks (2x4, 1x3, etc.)

•Wood shims

It is also recommended

to have a helper.

Install your choice

of locksets, with

2-3/8" backset

(sold separately).

Fully extend the

lock bolts into the

“locked” position.

With the lock bolts extended, align the lock bolts

with the holes in the lock-side jamb (B). Allow

approximately 3/16" space between the door and the

jamb. Make certain the jamb is plumb, and the top is

level to the top of the hinge-side jamb.

Mark the location of the mounting holes. Set the jamb

aside and pre-drill 3/16" holes where marked. Fasten

the jamb to the house using the provided one-way

screws (D).

Position door/hinge-side jamb assembly (A) in front of opening. Allow for a 1/8"

gap between the lock-side edge of door and inside-edge of your mounting surface,

as well as a 1/8" gap between the top-edge of door and bottom-edge of your

mounting surface.

Make certain the assembly is plumb.

Important: All jambs must be positioned on the facing surface of the frame

around the opening, and secured to a stud in the wall.

Mark the location of the mounting holes. Set door aside and pre-drill 3/16"

holes where marked. Fasten the door/jamb assembly to the house using the

one-way screws (D) provided.

Wood blocks and shims placed underneath

door, will help to hold position

1/8" gap

1/8"

gap

Position the top header jamb (C) across the top of the two side

jambs. Make certain there is a minimum 1/8" space between the

header and the top of the door frame, and that the header is level.

Mark the location of the mounting holes. Set the jamb aside and

pre-drill 3/16" holes where marked. Fasten the jamb to the house

using the provided one-way screws (D).

For warranty questions write to Unique Home Designs Customer Service at 973 N. Colorado Street, Gilbert, AZ 85233.

3/16" space

between door

and jamb

Summary of content (2 pages)

PAGE 1
Installation Instructions For Single Doors Parts and Recommended Tools 1 C 1/8" gap A 1/8" gap B Wood blocks and shims placed underneath door, will help to hold position Position door/hinge-side jamb assembly (A) in front of opening. Allow for a 1/8" gap between the lock-side edge of door and inside-edge of your mounting surface, as well as a 1/8" gap between the top-edge of door and bottom-edge of your mounting surface. Make certain the assembly is plumb.
PAGE 2
Instrucciónes de Instalación Para puertas sencilla Piezas y herramientas recomendadas 1 C Espacio de 1/8" A Espacio de 1/8" B Los bloques de madera y cuñas colocados debajo de la puerta, ayudarán a mantener la posición. Coloque el ensamblado de la jamba de la puerta/lado de la bisagra (A) frente a la abertura.