Instructions / Assembly
MK630
03052020
Steel Security Door Installation
SURFACE MOUNT
Tape measure
Level
Pencil
Safety glasses
Drill and 3/16" drill bit
Square
One-way driver (included with some models)
2x4 wood blocks
1x3 wood blocks
Wood shims
Touch-up paint (sold separately)
IMPORTANT: Read all instructions before beginning installation Tools Required:
A) Door/Hinge-side jamb assembly
B) Lock-side jamb
C) Top header jamb
D) 4" One-way screws (8)
A
B
C
D
Position hinge-side jamb assembly
1
Position door/hinge-side jamb assembly (A) in front of
opening. Allow for a 1/8" gap between the lock-side edge
of door and inside edge of your mounting surface, as well
as a 1/8" gap between the top edge of door frame, (not the
thin y strap welded to the edge of the door frame in select
models) and bottom edge of your mounting surface.
Make
certain the assembly is plumb.
Important: All jambs must be positioned on the facing
surface of the frame around the opening and secured
to a stud in the wall.
Mark the location of the mounting holes. Set door aside
and pre-drill 3/16" holes where marked. Fasten the door/
jamb assembly to the house using the
one-way screws (D) provided.
Wood blocks and shims
placed underneath door will
help to hold position
1/8" gap
1/8"
gap
Install lock set (sold separately)
2
Install your choice of locksets with 2-3/8" backset (sold separately). Fully extend the lock bolts into
the “locked” position.
Install lock side jamb
3
With the lock bolts extended, align the lock bolts with the holes in the lock-
side jamb (B). Allow approximately 3/16" space between the door and the
jamb. Make certain the jamb is plumb, and the top is level to the top of the
hinge-side jamb.
Mark the location of the mounting holes. Set the jamb aside and pre-drill
3/16" holes where marked. Fasten the jamb to the house using the provided
one-way screws (D).
3/16" space
between door
and jamb
Position the top header jamb (C) across the top of the two side jambs.
Make certain there is a minimum 1/8" space between the header and
the top of the door frame, and that the header is level.
Mark the location of the mounting holes. Set the jamb aside and pre-
drill 3/16" holes where marked. Fasten the jamb to the house using the
provided one-way screws (D).
Install top header jamb
4
Warranty
Your Unique Home Designs Security Door is warranted against manufacturing defects of the welded frame, pickets, and lock box for as long as you own the home upon
which the door is properly installed. If structural defects occur in these areas we will, at our discretion, repair or replace the door. Replacement items may vary in style due to
changes in suppliers and product. In addition, the paint nish is warranted not to blister, crack, or fade for one year from the purchase date. Damage due to rust is excluded
from this warranty. Screens, glass and hardware are also excluded from this warranty.
This warranty does not cover damage caused by vandals, break-ins, or attempted break-ins. On security screen doors equipped with the Meshtec Advanced Screen System,
the screen material is warranted against manufacturer defects under normal, residential use for the rst 10 years you own the product and terminates if you sell or otherwise
transfer the product or the property on which it was installed.This warranty is voided if the product is modied in any way. Any problem caused by abuse, misuse, failure
to maintain warranted item properly, adjustments due to settling of the structure that the product is mounted on, or acts of God, are not covered. Unique Home Designs
assumes no responsibility for labor costs of any kind for removal, replacement of parts, repairs, or reinstallation.
To make a claim under this warranty, send a brief written description of the problem, a picture of the problem,
proof of purchase, and your contact information to: Unique Home Designs, 973 N. Colorado
Street, Gilbert AZ. 85233 Attn: Warranty Claims
VIEW INSTALLATION VIDEOS
AND LATEST INFORMATION AT