Installation Guide
Parts and Recommended Tools
D
C
B
A
A) Door/Hinge-side Jamb Assembly (1)
B) Lock-side Jamb (1)
C) Top Header Jamb (1)
D) 4" One-way Screw (8)
YOU WILL NEED:
Your choice of locksets, with
2-3/8" backset (sold separately)
Recommended Tool List:
• Measuring tape
• Pencil
• Level or string plumb line
• Drill and 3/16" drill bit
• Safety glasses
• Wood blocks (2x4, 1x3, etc.)
• Wood shims
It is also recommended
to have a helper.
2
Install your choice
of locksets with
2-3/8" backset
(sold separately).
Fully extend the
lock bolts into the
“locked” position.
With the lock bolts extended, align the lock bolts
with the holes in the lock-side jamb (B). Allow
approximately 3/16" space between the door and
the jamb. Make certain the jamb is plumb, and the
top is level to the top of the hinge-side jamb.
Mark the location of the mounting holes. Set the
jamb aside and pre-drill 3/16" holes where marked.
Fasten the jamb to the house using the provided
one-way screws (D).
1
Position door/hinge-side jamb assembly (A) in front of opening. Allow for a
1/8" gap between the lock-side edge of door and inside edge of your mounting
surface, as well as a 1/8" gap between the top edge of door frame, (not the thin
y strap welded to the edge of the door frame in select models) and bottom
edge of your mounting surface.
Make certain the assembly is plumb.
Important: All jambs must be positioned on the facing surface of the
frame around the opening and secured to a stud in the wall.
Mark the location of the mounting holes. Set door aside and pre-drill 3/16"
holes where marked. Fasten the door/jamb assembly to the house using the
one-way screws (D) provided.
Wood blocks and shims placed underneath
door will help to hold position
1/8" gap
1/8"
gap
4
Position the top header jamb (C) across the top of the two
side jambs. Make certain there is a minimum 1/8" space
between the header and the top of the door frame, and that
the header is level.
Mark the location of the mounting holes. Set the jamb aside
and pre-drill 3/16" holes where marked. Fasten the jamb to
the house using the provided one-way screws (D).
3/16" space
between door
and jamb
3
MK630
12072017
Steel Security Door Installation
SURFACE MOUNT
• One-way driver (included)
Warranty Information
Your Unique Home Designs Security Door is warranted against manufacturing defects of the welded frame, pickets, and lock box for as long as you own the home
upon which the door is properly installed. If structural defects occur in these areas we will, at our discretion, repair or replace the door. Replacement items may vary in
style due to changes in suppliers and product. In addition, the paint nish is warranted not to blister, crack, or fade for one year from the purchase date. Damage due
to rust is excluded from this warranty. Screens, glass and hardware are also excluded from this warranty.
This warranty does not cover damage caused by vandals, break-ins, or attempted break-ins. On security screen doors equipped with the Meshtec Advanced Screen
System, the screen material is warranted against manufacturer defects under normal, residential use for the rst 10 years you own the product and terminates if you
sell or otherwise transfer the product or the property on which it was installed.This warranty is voided if the product is modied in any way. Any problem caused
by abuse, misuse, failure to maintain warranted item properly, adjustments due to settling of the structure that the product is mounted on, or acts of God, are not
covered. Unique Home Designs assumes no responsibility for labor costs of any kind for removal, replacement of parts, repairs, or reinstallation.
To make a claim under this warranty, send a brief written description of
the problem, a picture of the problem, proof of purchase, and your
contact information to: Unique Home Designs, 973 N. Colorado
Street, Gilbert AZ. 85233 Attn: Warranty Claims
VIEW INSTALLATION VIDEOS
AND LATEST INFORMATION AT