Installation Guide
Installation Instructions
For Patio Doors
2
Attach your choice of
locksets, with 2-3/8”
backset (sold separately) to
the active panel. Then, fully
extend the lock bolts to the
“locked” position.
1
Position the patio security door in front of
opening. Align the front edge of lock-side panel
with the inside edge of your lock-side mounting
surface (see illustration). Make certain that the
security door is vertically true (plumb).
Note: While also considering the lock-side jamb
in this positioning, verify all holes in the fixed
L-brackets will align with a mountable surface.
With a pencil, mark location to drill through the
pre-drilled holes of the fixed panel L-brackets.
Where marked, pre-drill 3/16” holes. Fasten
fixed panel to the house using the provided
one-way screws. See recommended mounting
order, in illustration below.
3
Align the lock bolt holes in the the lock-side
jamb with the extended lock bolts, allowing
approximately 3/16” space between the the
door and the jamb, from top to bottom. Make
sure the jamb is vertically true (plumb).
With a pencil, mark location to drill through the
pre-drilled holes of the fixed panel L-brackets.
Where marked, pre-drill 3/16” holes. Fasten jamb
to the house using the provided one-way screws.
Parts and Recommended Tools
C
B
A
A) Patio Security Door (1)
B) Lock-side Jamb (1)
C) 4” One-way Screw (8)
YOU WILL NEED:
Your choice of locksets,
with 2-3/8” backset
(sold separately)
Recommended Tool List:
•Measuring tape
•Pencil
•Level or string plumb line
•Drill and 3/16” drill bit
•One-way driver
•Safety glasses
•2x4 Wood blocks
•1x3 Wood blocks
•Wood shims
•Touch-up paint
It is also recommended
to have a helper.
3/16” space
between door
and jamb
For questions or warranty service, write to Unique Home Designs Customer Service at
973 N. Colorado Street, Gilbert, AZ 85233.
Align this
edge of
door with
edge of
mounting
surface
Secure
door to
house
using all
L-brackets
Start here
1
2
4
5
3
Tip: Wood blocks
and shims placed
beneath door
panels will help to
hold position.
MK444