Full Product Manual

NOTE: The direction in which your refrigerator doors open (door swing) can be reversed, from left to right
or right to left, by moving the door hinges from one side to the other. Reversing the door swing should be
performed by a qualified person.
1. Remove top hinge cover.
2. Remove top hinge with Phillips screwdriver and lift freezer door o of center hinge and set door aside.
3. Unscrew center hinge with Phillips screwdriver.
4. Lift refrigerator door o of bottom hinge and set aside.
5. Remove bottom hinge with Phillips screwdriver.
6. Now remove all plugs and caps from opposite side and place them in the holes you just remove the
screws from.
7. Using a Phillips screwdriver fasten the bottom hinge in place using the screws you previously removed.
8. Place fridge door on bottom hinge, then place middle hinge in top hole of fridge door and using the
Phillips screwdriver, fasten the middle hinge in place using the screws you previously removed.
9. Now place the freezer door on top of the middle hinge, then place top hinge in top hole of the freezer
door and using the Phillips screwdriver, fasten the top hinge in place using the screws you previously
removed.
10. Tighten all screws while making adjustments where necessary to ensure they are aligned correctly and
closing well against the cabinet, this will reduce any excessive frost build up.
IMPORTANT: After reversing the door hinge, the door gasket may be loose. Should you notice a gap
between the gasket and the cabinet, use a hairdryer or heat gun and heat the gasket while on the
appliance. The gasket will expand to meet the cabinet. Allow 30 minutes to cool before opening. A correct
gasket positioning is the key to prevent refrigerated air from escaping. Best to perform in the evening
before bedtime.
DOOR REMOVAL & REVERSAL INSTRUCTIONS
15