Installation Guide

• Do not install the freezer close to sources of heat, such as a stove,

boiler, heater, chimney, etc, and avoid exposure of the appliance to

direct sunlight.

• Locate the appliance in a cool well-ventilated room and make sure

that the air vents of the compressor housing cover are not ob-

structed. Also allow adequate spacing around the cabinet for air

circulation (3” or 7.5cm)

• Avoid unnecessary frosting in the cabinet by packing all food and

liquids in airtight packages or containers.

• Always keep food stored in tightly sealed packaging or containers,

and allow some space for air to circulate around each item.

• Avoid keeping the door open for extended periods of time or

opening the door too frequently as warm air will enter the cabinet

and cause the compressor to run unnecessarily often.

• Ensure there are no obstructions preventing the doors from closing

properly and forming a tight seal.

ENERGY SAVING TIPS