Installation Guide

To replace the oven burner orice

1. Open oven door.

2. Remove all racks, then the bottom pan by lift-

ingupthebackrsttoreleasethefrontthen

pull pan out.

3. Locate the burner tube and locate the retaining

screw at the front of the tube. Once this screw

has been removed, lift up the burner and pull away slightly to expose the oven

orice.

4.Witha7mmwrenchremovetheoriceandreplacewithLPGorices.

5.Replacetheburnertube,thenstartuptheoventocheckovename,makingsure

it’s tight and blue. Adjust the air shutter at the back of the burner tube to achieve

this. Once you have the bottom pan and oven door closed, you will be able to see

howtheameshouldlookbyviewingtheamethroughthedoor.

To replace the broiler burner orice

1. Open oven door.

2. Locate the burner tube on the top of the oven cavity and locate the retaining

screw at the front of the tube. Once this screw has been removed, lift up the burn-

er and pull away slightlytoexposethebroilerorice.

3.Witha7mmwrenchremovetheoriceandreplacewithLPGorices.

4.Replacetheburnertube,thenstartupthebroilertocheckovename,making

sure it’s tight and blue. Adjust the air shutter at the back of the burner tube to

achieve this.

GAS RANGE CONVERSION (continued)

Orifice

Wrench