Installation Guide

Cooktop Burner Operation

Thetopburneramesizeshouldbeadjustedso

that is does not extend beyond the edge of the

cookware. As a matter of safety, it’s recommended

that you comply with these instructions.

Ahighameonasurfaceburnerisbothinefcientandunsafe.Theameshould

always be adjusted so that it is no larger than the bottom of the pan. Fluctuations

inamesizecouldbecausedbypressurevariations,improperlypositionedburn-

ers, damage or debris.

To light a burner, press the burner knob in and turn counter clockwise to

highame/ignitionposition.Youwillheartheelectronicignitionclickingas

youcontinuetoholdtheknobdownuntiltheamelights.ALLelectrodeswillspark

at a rate of approximately 2 ½ pulses (sparks) per second. Continue to hold the

knob depressed until gas ignites at the burner. Adjust the intensity of top burner

heat in the same manner described above.

Note: In the event the electronic ignition system fails, the top burners and oven

pilot can be lit by holding a lighted match near the burner head and turning the

appropriate top burner knob to the “9 o’clock position”.

TOP BURNER HEIGHT

ADJUSTING THE TOP BURNER AND OVEN FLAME

(continued)

incorrect and good flame patterns