Installation Guide

24
5. Using an adjustable wrench replace the cap back on the regulator, do NOT over
tighten cap.
6. Remove the grates, burners and burner caps from the range to
accesstheorices.
7.Usea7mmwrenchtoremovetheorices.Eachoricecanbelocatedinthe
centeroftheburnerbase-seeg2
Burner Orice
8.RemoveallNGorices,placeinthebagandstoreinasafeplace.
9.TaketheLPGoricesprovidedandinstallthemasshownbelow,doNOTover-
tighten
See below for rating of orice for each model
Front RIght Rear Right Front Left Rear Left Oven Broil
LPG 0.53 mm 1.00 mm 0.9 mm 0.68 0.82 mm 0.8 mm
10.Oncealltheoricesareinstalled,replaceallburnersandburnercaps.
NOTE:Topameburnerheightadjustmentinstructionsarelocatedonpage27
GAS RANGE CONVERSION
LPG NG
g2