Installation Guide

24
7.Usea7mmwrenchtoremovetheorices.Eachoricecanbeaccessedeasily
-thelargerburneroriceislocatedontheburnerwall.
8.RemoveallNGorices,placeinthebagandstoreinasafeplace.
9.TaketheLPGoricesprovidedandinstallthemasshownbelow.
See below for rating of orice for each model
24” Model
Smallest Medium x 2 Largest Oven Broil
LPG 0.57 mm 0.93 mm 1.00 mm 1.07 mm 0.93 mm
10.Oncealltheoricesareinstalled,replaceallburnersandburnercaps,then
reuptheburnerstochecktheminimumameheight.
To replace the oven burner orice
1. Open oven door.
2. Remove all racks, then the bottom pan by lifting up
thebackrsttoreleasethefrontthenpullpanout.
3. Locate the burner tube and locate the retaining
screw at the front of the tube. Once this screw has
been removed, lift up the burner and pull away
slightlytoexposetheovenorice.
4.Witha7mmwrenchremovetheoriceandreplacewithLPGorices.
5.Replacetheburnertube,thenstartuptheoventocheckovename,making
sure it’s tight and blue. Adjust the air shutter at the back of the burner tube to
achieve this. Once you have the bottom pan and oven door closed, you will be
abletoseehowtheameshouldlookbyviewingtheamethroughthedoor.
To replace the broiler burner orice
1. Open oven door.
2. Locate the burner tube on the top of the oven cavity and locate the retaining
screw at the front of the tube. Once this screw has been removed, lift up the
burner and pull away slightlytoexposethebroilerorice.
3.Witha7mmwrenchremovetheoriceandreplacewithLPGorices.
4.Replacetheburnertube,thenstartupthebroilertocheckovename,making
sure it’s tight and blue. Adjust the air shutter at the back of the burner tube to
achieve this.
GAS RANGE CONVERSION (continued)
Orifice
Wrench