Use and Care Manual

Lighting the Top Burners

1.Toobtainaamemoreeasily,lighttheburnerbeforeplacingacooking

utensil on the burner grate.

2.Decidewhichburneryou’reignitingrstusingthescreeneddiagrambelow

the burner knob. The black dot indicates the position of the burner you’re

igniting.

3.To light a burner, press the burner knob in and turn counter clockwise to

highame/ignitionposition.Youwillheartheelectronicignitionclickingas

youcontinuetoholdtheknobdownuntiltheamelights.Oncetheburner

is lit, hold in for a few extra seconds to warm up the thermocouple so the

electromagnet in the burner valve stays in the open position once you release.

4.Afterlightingtheame,turnthecontrolknobtoadjusttheamesizeas

required.

Choice of Burner

DIAMETERS OF PANS WHICH MAY BE USED ON THE TOP BURNERS

BURNER MINIMUM MAXIMUM

Auxiliary 4” 23/32 (12 cm) 5” 1/2 (14 cm)

Semi-rapid 6” 19/64 (16 cm) 9” 7/16 (24 cm)

Rapid 9” 7/16 (24 cm) 10” 15/64 (26 cm)

Do not use pans with concave or convex bases

OPERATION OF RANGE