Installation Guide

9
THIS FREEZER MUST NEVER BE CONNECTED DIRECTLY
TO ANY AC (alternating current) POWER SOURCE!
THE FREEZER MUST ONLY BE CONNECTED TO A 12V OR 24V DC
POWER SOURCE, SUCH AS A SOLAR
BATTERY SYSTEM OR CHARGE CONTROLLER.
THE FREEZER WILL AUTOMATICALLY OPERATE ON EITHER 12V OR
24V DC. THE USER DOES NOT NEED TO MAKE ANY ADJUSTMENT.
ATTENTION: Polarity is important in wiring this DC appliance. Be sure
that the positive terminal of the battery or charge controller coincides
with the positive wire to the compressor, and the negative terminal of
the battery or charge controller coincides with the negative wire to
the compressor. The leads should be connected using cable shoes and
screwed connections. Joined leads should be avoided.
+ to + and - to -
positive to positive / negative to
negative (red wire) / (black wire)
DC POWER CONNECTION
ELECTRICAL DIAGRAM
IN-LINE FUSE
For 12V/24V operation, use a 15A fuse. A standard automobile fuse
is recommended and the fuse should be wired to the positive (“+”)
side of the system close to the positive battery terminal.
RED
ROUGE
BLUE
BLEU
GREEN
VERT
FAN/VENTILATEUR
DC 12V/24V
CONTROLLER
RÉGULATEUR
DIGITAL THERMOSTAT
THERMOSTAT NUMÉRIQUE
12V
RED BLACK