Use and Care Manual

13
INSTALLATION PROCEDURE
THESE STEPS REQUIRE LIFTING AND HANGING AT THE SAME
TIME - USE TWO/THREE PEOPLE
6. Locate the top (cabinet) holes and line up hood holes, while also
lining up to holes with the protruding wall screws.
7. Fasten the hood to the bottom of the cabinet by tightening
screws with a drill or screwdriver.
8. Tighten the screws to fi x the hood to the wall once it is fi xed to
the cabinet.
9. Run the ducting through cabinet and the electrical cables through
electrical access hole.
TIGHTEN
TOP FIRST
TIGHTEN
TO WALL
SECOND