Use and Care Manual

PRE INSTALLATION

DUCT PLANNING

• The ventilation hood is equipped for 8” round ducts. This hood can

be ventilated vertically through the top cabinet or ceiling. A duct

transition piece is provided for vertical exhaust. You can use elbows

(sold separately) to ventilate horizontally through the rear wall.

• Determine the exact position of the hood.

• Plan the route to vent the ventilation duct to the outside.

• Use the shortest and straightest path possible. For satisfactory

performance, the length of the duct should not exceed 12.5 feet of

equivalent length for all duct conﬁ gurations.

• Use only metal ducts.

WALL FRAMING FOR ADEQUATE SUPPORT

WARNING

THESE VENT HOODS ARE HEAVY. ADEQUATE STRUCTURAL

SUPPORT IS REQUIRED.

Aluminum

Foil Tape

Hammer

NECESSARY TOOLS

Marker or

pencil

Safety Gloves

Level

Utility knife Stud ﬁ nder

Powered

screwdriver or

drill

Measuring

tape

Flat-blade

and Phillips

screwdrivers