Warranty

UNIQUE UGP 6F

plate and twisting the alarm in the direction indicated by the "OFF"

arrow on the alarm cover.

Step A: Wall Alignment

Step B: Alarm Activation Step C: Removal and Installation

6.3 To insure aesthetic alignment of the alarm with the hallway or wall, the

UP ↑ arrow on the mounting plate must be vertical when wall mounting:

(See Step A in Figure 2)

6.4 As described in Figure 2, attach the mounting plate on the wall. Use the

screws and anchors provided to secure the mounting plate.

6.5 The battery is INSTALLED REVERSED FOR SHIPPING. Remove

and reinstall the battery in the correct orientation as noted on the inside

of the battery door. When installing the battery, align the “+” and “-“

battery terminals on the correct contacts. The alarm will beep once

indicating proper battery installation.

WARNING: Battery is required for operation of appliance, alarm operation

and detection of carbon monoxide. If no battery is installed, the appliance

will not stay lit. The battery door will not close easily and the unit will not

attach to the mounting bracket.

6.6 Twist the alarm in the direction indicated by the “ON” arrow on the

Figure 2: Installation Instructions