User Manual

10
INTERNAL CLEANING
Wash the inside of the appliance with lukewarm water and a mild soap. Never use abrasive or
corrosive cleaning agents, steel wool, scouring sponges, chemical cleaning agents, or highly
perfumed cleaning products to clean the interior as these will damage the surface and leave
behind a strong odor. A sponge, towel, or soft brush is recommended. Wash with a mixture of two
tablespoons (30ml) of baking soda to 1 quart (1.14L) warm water. After cleaning, wipe all surfaces
with a soft cloth and clean water to rinse, and allow the fridge/freezer to dry.
EXTERNAL CLEANING
Wash the outside of the cabinet with warm water and a mild soap or detergent.
Do not use abrasive or corrosive cleaning agents, chemical cleaning agents, steel wool or scouring
sponges to clean the fridge as it may cause damage to the surfaces.
POWER FAILURE
Most power failures are corrected within a few hours and should not aect the internal
temperature of the appliance if the number of times the door is opened is kept to a minimum.
If the power is going to be o for a longer period of time, take the proper steps to protect the
contents.
Note: Wait 3 to 5 minutes before attempting to restart the refrigerator if operation has been
interrupted.
VACATION
• Short vacations: Leave the appliance operating during vacations of less than three weeks.
• Long vacations: If the appliance will not be used for several months, remove all items and
disconnect the appliance from its power source. Clean and dry the interior thoroughly. To
prevent odor and mold growth, leave the door open slightly, blocking it open if necessary.
MOVING
• Remove all items.
• Tape down shelves inside the appliance.
• Turn the adjustable leg up to the base to avoid damage.
• Tape the door shut.
• Be sure the appliance stays in the upright position during transportation. Protect the outside of
the appliance with a blanket.
• If the appliance is placed on its back or side during transportation, upon reaching the
destination, allow it to remain upright for 6 hours before plugging in to avoid damage to internal
components.
CUSTOMER RESPONSIBILITIES
The following items are the responsibility of the customer and are not covered by the warranty:
• Proper care and use of the appliance as described in this manual.
• Damage to the interior or exterior finish or components after delivery.
• Proper power supply, circuit breaker, wiring, and connections.
• Replacement of LED lights. - Contact Unique’s technical service department for instructions on
how to fix the issue.
• Service required as a result of alteration, misuse, abuse, flooding, fire, lightning, or other acts of God.
CARE AND MAINTENANCE