User Manual

7
OPERATION
STARTING THE FRIDGE
After the fridge has been properly connected to a power source, the compressor will automatically
turn on and the cabinet will begin cooling. Allow the cabinet to cool for at least 4 hours prior to
adding foodstu.
TEMPERATURE CONTROL
The temperature within the fridge and freezer compartments is controlled by the thermostat
situated on the inside ceiling of the fridge compartment.
• The larger numbers indicate the coldest setting.
• The smaller numbers indicate the warmest setting.
When you first start the fridge we suggest that you turn the thermostat to a maximum setting (7)
until desired refrigeration temperatures are achieved. The correct internal temperature setting can
be found by measuring the temperature of the central or middle portion in the appliance. Internal
temperature of the appliance can vary based on ambient temperature, the quantity of items
stored and how frequently the door is opened. Note: The fridge will run a few degrees colder at
high elevations.
ADJUSTMENTS
As the ambient temperature changes with the season, it may be necessary to adjust the
thermostat to achieve the proper internal temperature. If the room/ambient temperature
approaches the appliance’s internal operating temperature, the appliance will not function as it
should. The appliance will tend to run colder during these conditions and it may be necessary to
turn the thermostat to a warmer setting (lower number). If the room/ambient temperature exceeds
100˚F (38˚C), the appliance will not function as it should. The appliance will tend to run warmer
and it may be necessary to turn the thermostat to a colder setting (towards the maximum setting).
INTERIOR LIGHT
The interior LED light is situated on the inside ceiling of the fridge compartment, it will turn on
when the door of the appliance is opened and will turn o when the door is closed. If the interior
light burns out, contact a certified service technician to have it replaced. Note: The functionality of
the appliance is not aected if the light is not working.
LEVELING INSTRUCTIONS
There are adjustable legs on the bottom of the front of the appliance that can be turned up or
down to ensure that the appliance is level.
1. Turn the leveling leg counter-clockwise as far as it will go, until the top of the foot is touching
the bottom of the cabinet.
2. Slowly turn the leveling leg clockwise until the appliance is level.
OPTIMAL OPERATING TEMPERATURE
THERMOSTAT
SETTING
FRIDGE
TEMPERATURE
FREEZER
TEMPERATURE
Optimal
Setting = 4
1˚C to 4˚C
33˚F to 39˚F
-10˚C to -15˚C
14˚F to 5˚F
Setting = 7 -4˚C / 24.8˚F -15˚C / 5˚F
NOTE: Setting 1 being warmest and 7 coldest
NOTE: Mechanical temperature
controller has a + or - , 0.5 range.
The fridge will run a few degrees
colder at high elevations.