Owners Manual

14
INSTALLATION INSTRUCTIONS
Be sure appliance is properly installed and grounded by a qualied technician.
It is the responsibility of the technician to make certain that your range is properly
installed. Situations caused by improper installation are not covered under the
warranty. Any expenses incurred due to such situations will not be paid by the
manufacturer of the appliance.
If this range is removed for any reason, (eg. service
or cleaning), it must be replaced as outlined before
placing the range back in operation.
Levelling a Free-Standing Range
All free-standing ranges must be level to obtain proper
cooking results. The leveling legs should be screwed
into the corner brackets. Place pan or measuring cup
partially lled with water or a level on the oven rack.
Adjust the leveling legs until the range is level. The top
of the side panels should be level with the counter top.
WARNING
A child or adult can tip the
range and be killed. Install the anti-tip device to the
structure and/or the range. Verify the anti-tip device
has been properly installed and engaged. Engage
the range to the anti-tip device by ensuring the anti-
tip device is re-engaged when the range is moved.
Re-engage the anti-tip device if the range is moved.
Do not operate the range without the anti-tip device
in place and engaged. See installation instructions
for details. Failure to do so can result in death or
serious burns to children or adults.
Making sure the anti-tip bracket is installed:
• Slide range forward.
• Look for the anti-tip bracket securely attached to oor.
• Slide range back so rear range foot is under anti-tip bracket.
X2
Range Foot
Anti-tip Bracket