Owners Manual

40
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE CORRECTION
Surface burner fails to
light
a. Clogged burner ports a. Remove burners and clean out
dirt and spider webs
b. Battery dead b. Replace with new D size
battery
c. Ignition relay defective c. Replace relay
Uneven ame a. Clogged burner ports a. Remove burners and clean out
dirt and spider webs
b. Uneven burner alignment b. Check black caps are placed
evenly onto burners
Oven does not light a. Oven pilot is out a. Relight oven pilot
b. Moisture buildup in ceramic
sleeve of oven electrode
b. Heat up ceramic sleeve with
BBQ lighter to remove moisture
Oven Temperature
seems to be inaccurate
Food takes too long to
cook
Food cooks too fast
Overbrowning
a. Oven was not preheated a. Preheat oven for 10 minutes
b. Incorrect use of aluminum foil b. Refer to section on aluminum
foil
c. Oven bottom incorrectly in
place
c. Replace oven bottom correctly
d. Oven calibration of burner out
of adjustment
d. Have technician calibrate oven
and adjust burner