Manual and Installation Guide

25
To replace the oven burner orice
1. Remove the back panel
2.Locate/disconnectovenoricehousing
screws x 2 (Fig 1)
3. Gently bend gas tube to gain access to the
orice
4.Usea7mmsockettoremoveoriceand
replacewithspeciedoriceforgasconver-
sion
5.Remountovenoricehousingscrewsx2
To replace the broiler burner orice
1.Locate/disconnectbroiloricehousing
screws x 2
2. Gently bend gas tube to gain access to the
orice(Fig2)
3.Usea7mmsockettoremoveoriceand
replacewithspeciedoriceforgasconver-
sion
4.Remountbroiloricehousingscrewsx2
5. Replace back panel
Note: Check for leaks using a leak detec-
tor or soapy water with recommended ratio
of 75% water, 25% dish washing soap.Once
you have completed the conversion, check
the operations of ignition making sure each
ofthe4burners,pilotameandovenburner
amearefunctioningcorrectly.Pleaserefer
to pages 30 through 35.
GAS RANGE CONVERSION
(Fig 1. Broiler)
(Fig 2. Oven)
OVEN
BROILER