User Manual
8
OPERATION
STARTING THE FRIDGE
After the fridge has been properly connected to a power source, the compressor will automatically
turn on and the cabinet will begin cooling. Allow the cabinet to cool for at least 4 hours prior to
adding food stuff.
OPERATION
Tap any key for the rst time and the control panel will be activated. If there is no button selection
for one minute, the LED display will automatically go off.
MODE
Tap the “Mode” button to select your desired operation mode. Available modes are: Quick Cool,
Quick Freezer and Optimal.
QUICK COOL
The fridges temperature will be set to 2° and will run for 12 hours. After 12 hours, this mode will au-
tomatically disable and resume normal operation.
QUICK FREEZE
The freezers temperature will be set to -22° and will run for 24 hours. After 24 hours, this mode will
automatically disable and resumre normal operation. Note: Quick cool mode does not change the
Quick Freezer mode.
OPTIMAL
Tapping the “Optimal” button will adjust the fridge temperature to 2° and the freezer temperature
ito -22°. If press any button other mode or temperature is selected the “Optimal” mode will be dis-
abled.
FRIDGE +/-
Tap the “Fridge +/-” button to adjust the temperature of your fridge. Note: The temprature range
for the fridge is 1°C to 7°C.
FREEZER +/-
Tap the “Freezer +/-” button to adjust the temperature of your freezer. Note: The temprature range
for the freezer is -14°C to -22°C.
When desired temperature is selected the numbers will ash 5 times to conrm. If another mode is
selected during that period switched during the ashing period, swtich will take effect immediately.
CELCIUS & FAHRENHEIT SELECTION
Press and hold down the “Fridge +/-” and the “Freezer +/-” button to switch between celcius and
fahrenheit.
DOOR ALARM
Press and hold the “Mode” button for 3 seconds to disable the door alarm function. Note: the door