User Manual

20
CLEANING
INTERIOR CLEANING
You should clean the appliance interior regularly. it will be easier to clean when food stocks are
low. Wipe the inside of the fridge freezer with a weak solution of backing soda and water and then
rinse with warm water using a wrung out sponge or cloth. Wipe completely dry before replacing
the shelves and baskets. Thoroughly dry all surfaces and removable parts before putting them
back into place. Although theis appliance automatically defrosts, a layer of frost may occur on the
freezer compartments interior walls if the freezer door is opened frequently or kept open too long.
It the frost is too thick, choose a time when the freezer is nearly empty and proceed as follows.
1. Remove existing food and accessories baskets. Unplug the appliance from the main power and
leave the doors open. Ventilated the room thoroughly to accelerate the process.
2. When defrosting is completed clean your freezer as described above.
WARNING
Do not use sharp objects to remove frost from the freezer compartment. Only after the interior is
completely dry should the appliance be switched back on and plugged back into the main socket.
DOOR GASKET CLEANING
Take care to keep door gasket clean. Sticky food and drinks can cause gasket to stick to the cab-
inet and tear when you open the door. Wash gasket with a mild detergent and warm water. Rinse
and dry thoroughly after cleaning.
CAUTION
Only after the door seals are completely dry should the appliance be powered on.
REPLACING THE LED LIGHT
WARNING
The LED light must be replaced by a competent person. If the LED light is damaged contact an
authorized service personnel. Use only manufacturer-authorized service parts.