Owners Manual

17
Door Removal & Reversal Instructions
NOTE: The direction in which your refrigerator doors open (door swing) can be
reversed, from left to right or right to left, by moving the door hinges from one side to
the other. Reversing the door swing should be performed by a qualified person.
1. Remove top hinge cover.
2. Remove top hinge with Philips screwdriver and lift freezer door off of center hinge
and set door aside.
3. Unscrew center hinge with Phillips screwdriver.
4. Lift refrigerator door off of bottom hinge and set aside.
5. Remove bottom hinge with Phillips screwdriver.
6. Now remove all plugs and caps from opposite side and place them in the holes
you just remove the screws from.
7. Using a Philips screwdriver fasten the bottom hinge in place using the screws you
previously removed.
8. Place fridge door on bottom hinge, then place middle hinge in top hole of fridge
door and using the Phillips screwdriver, fasten the middle hinge in place using the
screws you previously removed.
9. Now place the freezer door on top of the middle hinge, then place top hinge in
top hole of the freezer door and using the Phillips screwdriver, fasten the top hinge
in place using the screws you previously removed.
10. Tighten all screws while making adjustments where necessary to ensure they are
aligned correctly and closing well against the cabinet, this will reduce any excessive
frost build up.
Chapter
6