?1 13@B7471/B3 Product: Serial#: Result: Adventure Armor Mixed-Reality FPV Racing Kit
A1/< B= 53B B63 ;=07:3 />> Adventure Armor
USER MANUAL OF THE ADVENTURE ARMOR MIXED-REALITY FPV RACING KIT VERSION 1.3 B/0:3 =4 1=
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 53<3@/: 7<4=@;/B7=< I. OVERVIEW The Adventure Armor Mixed-Reality FPV Racing Kit (hereinafter "the Kit") provides every item you will need to turn a living room, a backyard, a miniature craftwork, a small place in the forest or anywhere you could imagine into a mixed reality gaming environment, where you will find plenty of joy from playing the Adventure Armor mobile game within.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 ○Time Attack Cards ○Beacon poles ○Beacon bases ○Infiltrator MK1 ○USB cable ○Charger ○7 Remote sight 1 ×11 2 ×22 3 ×22 4 ×1 5 ×1 6 ×1 ×1 II. QUICK START GUIDE This guide demonstrates a few steps to set up the items to make them game-ready. Step 1: use the USB cable and the charger to charge Infiltrator MK1 from AC outlet, or use the USB cable only to charge from a computer’s USB port.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 *Warning: avoid letting children use the charger. Step 2: when Infiltrator MK1 is fully charged, the status indicator light will automatically turn off. Flip the optical turret 90 degrees up. Press and hold the power button for 3 seconds until the status indicator light start blinking. Place Infiltrator MK1 on the field.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 Step 3: assemble a Time Attack Card, two beacon poles and two beacon bases into a Mixed-Reality beacon. Step 4: place at least one “Flag” beacon and the “Waypoint 1” beacon on the field which is considered to be the gaming environment.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 Step 5: scan the QR code shown below or on the back of the package to download the Adventure Armor mobile game from Apple App Store or Google Play. Follow the in-game tutorial to start a game. III.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 Engine torque 12mN·m Top speed 1.17km/h Battery capacity 300mAh Charging voltage 5V Working radio frequency 2.4GHz Remote control distance 5m Video resolution 1280×720 FOV 60° Remote sight IPD 64mm FOV 78° Applicable myopia < D 5.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 IV. SYSTEM REQUIREMENTS Android platform Operating System Android 6.0 or higher SoC Qualcomm Snapdragon 820 equivalent or higher Memory 2GB or higher Storage Minimum 150MB available Sensors Camera, touch screen, accelerometer, gyroscope iOS platform Operating System iOS 9.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 7<47:B@/B=@ ;9& I. OVERVIEW Infiltrator MK1 is a tracked reconnaissance vehicle. It can be remotely controlled by the mobile game Adventure Armor.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 II. POWER BUTTON The power button can be either clicked or held down. The three tables below describe how these actions behave under specific status. Status 1: power is off Click Turn on the headlights for 5 seconds. Click again repeatedly before time runs out will keep the headlights constantly on. It is useful when you are looking for a handy flashlight.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 Press and hold Power down Infiltrator MK1. for 3 seconds Idle for 5 Infiltrator MK1 will automatically power minutes down to save energy. Status 3: power is on and connected to the game Click No response. Since the headlights control is overridden by the game. Press and hold Power down Infiltrator MK1. for 3 seconds III. OPTICAL TURRET Optical turret is equipped with a camera.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 the camera may be damaged. *Warning: do not bend the orange flexible printed circuit by hand. Always let it naturally bended by flipping the optical turret. IV. STATUS INDICATOR Status indicator is an orange signal bulb that blinks in specific frequency to indicate the status of Infiltrator MK1.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 Place your smartphone in the remote sight as shown below when the game asks you to: *Note: for the first time, press the gear button and scan the QR code printed on the bottom of the remote sight. This operation will correct the image distortion automatically. A trigger is located on the top right corner of the remote sight.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 *Note: press the cover of remote sight tightly after placing the smartphone so the vacuum sticker could prevent the phone from slipping out. ;7F32 @3/:7BG 03/1=
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 /2D3
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 Freeplay: Start a game immediately without analyzing scores. you will be able to control Infiltrator MK1 freely for exploring, practicing, taking photos and recording videos. Settings: This sub-menu provides various options to set up languages, sound effects, music, etc. And advanced settings for fine tuning Infiltrator MK1’s handling. Memoirs: Here stores the captured photos and videos.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 II. 2D CONTROL INTERFACE The 2D control interface provides possibility to play the game without wearing remote sight. This interface is sufficient to finish a race. Two control mechanisms are provided in this interface: virtual joystick control and tilt control. For detailed instruction of using the 2D control interface, please refer to the in-game manual. III.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 can be controlled via head motion sensing. The Visualized Artificial General Intelligence (V.A.G.I.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.3 you with operating the Infiltrator MK1. Simply chat to her and you will know what to do. For more information about using the holographic control interface, please refer to the in-game manual.
USER MANUAL OF THE ADVENTURE ARMOR MIXED REALITY FPV RACING KIT VERSION 1.
