Mini Bluetooth Keyboard 迷你蓝牙键盘 (KP-810-21BTL) instructions 使用指南
open players open searching FN+Lock Selection open mail box mute mouse left open my computer Adjustable mouse speed two speed can be adjustable open the browser home gape mouse right FN+Touch the board the scrollbar look through the web Power Switch
Safety Precautions Safety Matters To avoid injury,death of personnel or damage to the equipment the operator must refer to the explanations in this User’s Manual Battery:There is a lithium-ion rechargeable battery in this device.Don’t water this device,or put it in a humid environment for a long time or the device will be damaged. Attention to traffic safety (CAR PC):Do not use the device while driving.When you want to use it,please park your car.
Introduction Product overview Touchpad This product was added to the innovative function Of the mouse wheel,when you press the Fn button With your fingers Touch anywhere in the sliding region,can facilitate the realization of the mouse wheel functions.This human design,it can be easier for to browse the web better,edit documents. Interference After finishing using the keyboard,push the switch to the off position.This turns off the power,of the keyboard.
Notes : This product has the configuration of A and B configuration can choose Configure A: lithium battery version,this version built in rechargeable lithium battery,additional charge USB line. Configure B: Install AAA* 2 battery,this version dose not support the charging function. Appendix Technical parameters Specification Measurements(LxWxH): 146.8x97.5x19mm Weight(grams): 110g Operational Range: up to 10 meters Transmit power: +5db Max Operation voltage: 3.
Troubleshooting Below are some basic troubleshooting scenarios for the device.Please contact support from the place of purchase if you are unable to resolve any issuse with the device.Problem Possible issue Solution Pairing and establishing connection with computer . Windows XP/2000 Let's take Microsoft Bluetooth Software as an example to describe Bluetooth Search,Pairing and Connection, other Bluetooth software please refer to its own user manual. 1.
3.Click “Start”,“Control Panel”(make sure you're in Classic View),and then double-click Bluetooth Devices.Select “Add”. 4.In the Add Bluetooth Device Wizard,select the “My device is set up and ready to be found check box”,and then click“Next”. 5. After icon of “Bluetooth Keyboard” appear ,click “Bluetooth Keyboard”,and then click “Next”. Bluetooth Keyboard New Device 6.When the wizard asks you which passkey you want to use,click “Choose a passkey for me”.Then click “Next”. 7.
Bluetooth keybaord Bluetooth Reset An window like below will popup indicating that system is search a devie to add... Then you will be required to input a pass code for your device, please do type the code with bluetooth keyboard, then press Enter Bluetooth Keyboard Turn keyboard on by sliding the power switch to ON, LED3 will flash one time, then press key “bluetooth reset” till LED3 flash. And Bluetooth Keyboard will appear in the window. Select it and click “Next” NOTE:1.
CONNECT TO iPAD/ iPhone 1.Turn your Bluetooth Keyboard on by switch button to on, press Bluetooth Reset key till LED3 flash. 2.Turn on your iPhone,tap“settings”=>“Bluetooth”, then your iPhone will search the other Bluetooth for pairing, “Bluetooth keyboard” will be listed when system find your Bluetooth keyboad. 3.Tap “Bluetooh keyboard”,then system will install driver and prompt you to input pass code you must type the pass code with your Bluetooth keyboard. 4.
4.Icon of Bluetooth Keyboard will appear in the list when bluetooth keyboard is found,tap this icon for pairing 5.Tap “Bluetooth Keyboard”,then system will install driver and prompt you to input pass code you must type the pass code with your bluetooth keyboard. - Please be noted that your mobile can’t be connected and can’t be used if your mobile have no HID profile or contact our service dept.
unit does not respond 1.Low battery power. 2.Unit is not turned on. 1.Configure A:charge the device for at least 15minutes.Configure B:Replacement of the AAA.2 battery 2.Check if the switch selected to the“ON”position. Keyboard can not establish a connection to the receiver. The mouse pointer moves erratically and/or unresponsive. 1.Device may not be within optimal range of the receiver 2.Low voltage 3.Dust or oil on the touching. 1.Bring the unit closer to the receiver. 2.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
