User's Manual

1
Installation Instructions
Note for Optional Accessories:
*This bike trainer can match with the thru-axle bike rear wheel by installing the thru-axle adapters. This
accessory is NOT included in the package, please select and purchase the thru-axle adapter separately on the
UNISKY online store.
Step 1. Bike Confirmation
Before using the bike trainer, please confirm the specification of the bike that you want to use. This product
is suitable for 26", 28', 700C and 29" mountain bikes and road bikes.
Step 2. Assembly of the Bike Trainer
2-1 Open the box and check all the parts and quantity according to the spare parts list.
2-2 Put up the frame.
1）As shown in figure 1, put up the two pipes A of the bike trainer to the maximum position, place them on
the working surface, and ensure that the movable pin of B cylinder slides into slot C.
2）As shown in the figure above, align the round hole on the electromagnetic coil damper with the round
hole on the iron stand, put a flat washer on the hexagon bolt, and then pass the bolt through the round holes
on the iron stand and the damper at the same time to make it fixed in series, finally put on the flat washer,
and tighten the lock nut with the L-type socket spanner.