User's Manual

1
Smart Training
1）Calibration
The mechanical energy loss on the transmission link of bike trainers, tires, and stands will cause by the bicycle
installation's frequency or the compression force produced when adjusting the tire and the tire friction. It will
affect the power accuracy. Therefore, we advise you to make Spin-down calibration after installation to ensure
better power accuracy.
Search and download the Onelap Utility on the Google Play or App Store, or scan the QR code above to
download it. Make sure the Bluetooth is on and the bike trainer disconnect from other apps. Find and connect
the bike trainer on the Onelap Utility, and start the calibration process after reading the instructions carefully.
Note: We advise you to warm up and ride on the bike trainer for 10 minutes for the best calibration result.
2）Bike Trainer Pairing
This bike trainer needs to be connected with external power supply before it can be used (When using PC,
you need to plug the ANT+ receiver into the USB port of the computer).
1. Take out the power adapter in the packing box, connect the DC plug to the bike trainer first, and then
connect the power supply. When the power is connected, the power signal indicator on the damper is always
on, and the ANT + signal indicator and Bluetooth signal indicator are flashing.
2. After pairing with the third-party riding software of the computer, the ANT + signal indicator is always
on, and the FE-C protocol is supported when using. After the Bluetooth signal is linked with the app of
mobile phone or tablet, the BLE signal indicator is always on.