User's Manual

1
Maintenance
 The product can be folded for storage. Operation method: press down the two A pipes directly and tuck
them in. Take care not to hurt your hands when folding and tucking.
 This product must be stored in a clean indoor environment that is dry, away from direct sunlight, fire,
water, or other dangerous goods.
 Due to the circuit board structure inside the product, please only wipe the product with a clean cloth for
cleaning. Do not use detergent, cleaning powder, or other chemical solvents to avoid personal and
financial safety.
Common Fault and Eliminating Methods
In case of abnormality, please inspect and solve it according to the following table:
Faults
Inspection and Solutions
The bike trainer is wobbly
and shaking
 The ground is not flat. Please put it on the flat ground or yoga mat
for riding training

Check if both or one of the A tubes is fully open.
The bike trainer cannot be
paired with the smart device

Check if the smart device is in the startup state
 Check the wireless communication connection: check if ANT+ is
connected to your computer or tablet. If you use Bluetooth
connection, please confirm that the Bluetooth function is turned on.
Excessive body vibration
during use
 Check if the exposed counterweight wheel shakes and if the knobs
and nuts on both sides of the bike trainer are loose.

Check whether the tire pressure of a bicycle is in normal condition.
Note:
If the fault still cannot be eliminated, please contact the authorized dealer of UNISKY for assistance.
Do not disassemble the product by yourself, which will cause damage to the product and affect the
after-sales service of the product.