Before Use the device Remove the belt clip Before insert batteries into the device, first pull the belt clip latch away from the device(See PIC02 Installing the batteries 1.Slid down the battery compartment cover( See pic03). 2.Insert 3*AAA batteries(Not included) 3.Position the batteries according to polarity making on the battery compartment. 4.
Using the device 1.Turning the device on/off: Switch on the device: press and hold on the on/off button for 3 seconds, then you will hear a beep sound. Switch of the device: press and hold on the on/off button for 3 seconds, then you will hear a beep sound. 2. Adjusting the volume: To increase the volume, press the Up button and press the Down volume. Note: The volume level is displayed on the screen. button to decrease 3. Low Battery Indication.
Note: 1.The maximum talking range is 5km, it will depended on your surroundings and environment. It will be affected by obstructions such as hills or buildings. 2.Don’t try to use two devices which are less than 1.5mm(5 feets) apart, otherwise, you may experience interference. 5. Changing Channels: Press the MENU button one time, The channel number will flash on the display. Press the up / down button to change the channel, Press the PTT button to confirm and return to stand-by mode.
7. VOX (Hands free function) Press the MENU button three times, the current VOX setting will flash on the display and the VOX icon will display. Press up button to set the VOX sensitivity level between 1 and 3 level( level 3 is the high sensitive level). Press down button until “OF” appears on the display to turn VOX OFF. Press the PTT button to confirm and return to stand-by mode. In VOX mode, the radio will transmit a signal when it is activated by your voice or other sound around you.
11, Sending a call Tone. Press the CALL button one time quickly, the call tone will be transmitted on the setting channel. 12. Roger Beep On/Off After the PTT button is released, the device will send out a roger beep to confirm that have stopped talking. Press the MENU button 5 times, “Ro” will be displayed. Press the UP /Down button disable the roger beep ON/OFF. Press the PTT button to confirm your selection and return to the stand-by mode. 13. Backlit Display.
15. Battery saving function: When the device has not been used for 6 seconds, the economy mode is automatically activated, This does not affect the reception of transmission and the stand by mode is automatically re-activated as soon as signal is detected. 16. Buit-in Flash light Your device has a built-in flash light that can be used in sending light signals or for our lighting needs. 17. Lock & Unlock the device Press and hold MENU-button for 3 seconds to lock the device.
Channel and Frequency(MHZ) Europe(8CH) Ch. Frequency Ch. Frequency 1.446.00625 2.446.01875 3.446.03125 4. 446.04375 5. 446.05625 6. 446.06875 Ch. Frequency 7. 446.08125 8. 446.09375 USA(22CH) Ch. Frequency 1. 462.5625 2. 462.5875 3. 462.6125 4. 462.6375 5. 462.6625 6. 462.6875 Ch. Frequency 7. 462.7125 8. 467.5625 9. 467.5875 10. 467.6125 11. 467.6375 12. 467.6625 Ch. Frequency Ch. Frequency 13. 467.6875 14. 467.7125 15. 462.5500 16. 462.5750 17. 462.6000 18. 462.6250 19. 462.6500 20. 462.6750 21.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
