Manual

Page 5 656980
5. Next take off the old power steering pump, brackets, and hoses. Then install the new power steering
pump kit by using the same two lower holes on the block that the old pump used. New hardware and
brackets are provided. Torque the bolts down. Measure around the pulleys to find what size belt you
will need. We used a 34.5” belt but you may require a different size. Install the belt and tighten the
belt with the adjustment on the pump bracket. It may be necessary to change your pulley drive
orientation. You have to determine your set up per application depending on your vehicles
accessories.
Bushings go
between motor
& pump mount.
Two Block Mounting Holes